Как вы нас нашли?
Yandex
37% [365 Голоса]
Google
32% [316 Голоса]
Другая поисковая система
1% [11 Голоса]
Из Форума
4% [44 Голоса]
Печатные издания
1% [12 Голоса]
Знакомый посоветовал
12% [113 Голоса]
Случайно
12% [118 Голоса]
Голосов: 979
Начатый: 17/03/2011 15:27
|
|
Турбина Mitsubishi Lancer EVO 7-9
|
Производитель:
|
|
Код:
|
005603
|
Описание:
|
The EVOGreen Model turbocharger is a direct bolt-in upgrade for 2006 Lancer Evolution cars and can also be used on earlier EVO4-8 models with the EVO8 turbo installation kit. rnrnThis turbo is externally the same as a stock EVO9 turbo, it uses the larger diameter EVO9 compressor housing and bearing housing found in the 2006 models. It uses our 700cfm 69-5 billet compressor wheel and our enlarged 11 blade turbine wheel. This combination of increased compressor and turbine flow results in a very broad powerband and stock like boost response while still being capable of well over 400whp. rnrnThis turbocharger operates very well in the 20-22psi range on pump gas, and 24-28psi on E85 and 26-32psi on C16. Customers who desire even quicker spool up and never plan on running boost higher than 22psi can benefit from selecting the 9.8cm2 housing. The penalty for running the 9.8cm2 housing is much less obvious when coupled with the larger 11 blade turbine wheel and the increase in back pressure from the smaller housing is negligible until boost exceeds 22psi. To this end we are trying to obtain the very rare 9.0cm2 housing to gain even better bottom end power and response - we'll update on this topic in the future. rnrnThe turbine flow maps shown below shows how the choke flow of the turbine varies with changes in the turbine nozzle area. rnrnThe 18psi wastegate actuator is strongly recommended for applications where the boost pressure will always be 20psi or higher. rnrnThe turbine housing gasket match port job is recommended if using a gasket match ported manifold. rnrnThe turbine housing ceramic coating is recommended to reduce heat in the engine compartment, particularly useful if the factory heat shields are missing.
|
Цена:
|
Позвоните, чтобы уточнить цену. |
|
|
|
|
|
Контактные телефоны:
Александр (запчасти)
066-49-00-123
096-74-24-525
063-23-56-800
Иван (тюнинг)
050-508-42-28
098-269-16-45
063-236-28-48
ICQ:
e-Mail:
Адрес:
- г. Луганск ул. Советская 5.
|
|
Текстильные коврики салона Chery GrossEastar 7мест.(2007-) для Автоковрики - CHERY Crosseastar
|
|
Резиновые ковры салона Audi A6 (2008-2010) для Автоковрики - AUDI A-6
|
|
Резиновые коврики салона CHERY Indis (Beat S18D) для Автоковрики - CHERY Indis (Beat S18D)
|
|
Автоковрики салона CHERY Fora для Автоковрики - CHERY Fora
|
|
Резиновые коврики салона CHERY Amulet (Locer) для Автоковрики - CHERY Amulet
|
|
Случайные статьи
Популярные статьи
Статистика статей
· Статей: |
619 |
· Прочтений: |
1537215 |
|
Вы не зарегистрированы? Нажмите здесь для регистрации.
Забыли пароль? Запросите новый здесь.
|
|